Fiber Optical Switch 1×32 WebGUI
The Fiber Optical Switch 1×32 2-channel WebGUI MM is a future-proof solution for modern high-bandwidth IP networks, designed to be fully protocol independent and transparent to any data rate. With a purely optical signal path and no optical-to-electrical conversion, the switch eliminates electrical losses and bandwidth limitations while ensuring maximum reliability in demanding environments.
The unit can be operated manually or controlled remotely through an integrated processor with operating system and built-in web server, enabling flexible management and seamless integration into advanced network infrastructures. Its robust design makes it ideal for applications such as optical protection, test systems, remote reconfiguration, FTTH provisioning, disaster recovery and communication restoration, where dependable and fast optical switching is essential.
Product Description
- Pure optical path
- Transparent to data speed
- Manual or remote control, uses software calls to webserver to operate switching
- Management Web GUI, command and TTL-level.
- Cost efficient
- Future proof
- Redundant power supply (optional)
Technical Data & Features
Connections
- Optical LC Multimode 850/1300 nm
- Optical channels in 1 LC
- Optical channels out 32 LC
- Insertion loss type 0.9-1,6 db
- Crosstalk -80 db
- Repeatability ± 0.1 db
- Switching time 3.5 ms
- Durability 30.000.000 Cycles
Power
- Power Connector IEC60320
- Power Supply 100-240 VAC 50/60 Hz or 48-250 VDC ±20 %
- Consumption max 25 W
Remote control
- Connector RJ45
Mechanical data and environment
- Cabinet dimensions (HxWxD) 44x444x227 mm
- Weight 3 kg
- Operating temperature -5° to 70° C
- Relative Humidity 10%-80%
Fiber Optical Switch 1×4 MPO
Fibersystem’s fiber optic 1x4 MPO switch is a fully optical, bidirectional, and data-rate transparent solution for switching between four different channels. It can be controlled via the front-panel buttons or externally through RS232/TTL, and it retains the selected channel even during a power outage. Its design without any electrical conversion makes it ideal for environments with high demands on security, robustness, and...
Fiber Optical Switch 1×6
The area of use of the Fiber Optic Switch is to be able to switch between 6 different channels (sources/destinations). For example, you can switch between different sources, networks (red/black), or different destinations such as an additional screen or projector. There is no electrical conversion in the switch, it is 100% optical. Fibersystems Fiber Optic Switches are built to meet the most...
Fiber Optical Switch 1×4
The area of use of the Fiber Optic Switch is to be able to switch between 4 different channels (sources/destinations). For example, you can switch between different sources, networks (red/black), or different destinations such as an additional screen or projector. There is no electrical conversion in the switch, it is 100% optical. Fibersystems Fiber Optic Switches are built to meet the most...
Fiber Optical Switch 1×8
The area of use of the Fiber Optic Switch is to be able to switch between 8 different channels (sources/destinations). For example, you can switch between different sources, networks (red/black), or different destinations such as an additional screen or projector. There is no electrical conversion in the switch, it is 100% optical. Fibersystems Fiber Optic Switches are built to meet the most...
