Fiber Optical Extender M/R -200km
Fibersystem 21-223 SM/SM Extender (converter) is intended to extend optical reach for low speed data signal into long haul distances. Using a 21-223 the optical short reach signals can be sent without the need for additional and expensive communication systems normally found in long haul communications. When combined with the other products in Fibersystems teleprotection communication product line this converter allows a very cost effective solution.
The 21-223 is particularly useful in differential line protection setups where dedicated fiber is available thus eliminating the need for multiplexers for the teleprotection traffic.
Product Description
- Protocol (transparent) independent up to 2Mbit/s 1310nm (IEEE C37.94) (C3794)
- Powerbudget 46dB in singlemode 1550nm
- Standards compliant for power substation installation
- 19” mounting with only 200mm depth
- Single supply range from 48VDC to 250VDC or 110VAC to 230VAC
- Typical distance up to 200km
Technical Data & Features
Fiber optic link – Singlemode
- Wavelength: 1310nm.
- Fiber optical connector: LC
Optical system budget: 15dB in singlemode fiber 9/125um.
Fiber optic link – Singlemode
- Wavelength: 1550nm
- Fiber optical connector: LC
- Optical system budget: 46dB
- Fiber optic protocol: Singlemode 1310 data is sampled at 25M samples/s and coded with 4B/5B coding. Singlemode 1550 data 125Mbit/s
Power
- DC: 48V DC to 250V DC, ±20%
- AC: 110VAC to 230VAC ±20%, 50−60 Hz
- AC/DC-connector: IEC 320, 3 pin
- Power consumption: <15W
Environmental
- Temperature range: Operating, -20 to +55 oC. Storage, -40 to +85 oC.
- Relative humidity: Operating, 5 to 95 % . Storage, 5 to 95 % non condensing
- CE compliance
Immunity
- EN 61000-6-2, EN 61000-6-4, EN 50178
Mechanical
- Vibration: IEC 60255-21-1, IEC 60255-21-2, IEC 60255-21-3
- EMC compliance: IEC 60255-22-1, IEC 60255-22-2, IEC 60255-22-3,IEC 60255-22-4
- Insulation: IEC 60255 / EN 50178 , IEC 60255-5, IEC 60255-5
Dimensions and Weight
- Physical size
- Height: 45 mm, Width 483 mm, Depth 173 mm
- Weight: 3 kg
Associated products
Fiber Optical Extender 80-120km
Fibersystem 21-223 SM/SM Extender (converter) is intended to extend optical reach for low speed data signal into long haul distances. Using a 21-223 the optical short reach signals can be sent without the need for additional and expensive communication systems normally found in long haul communications. When combined with the other products in Fibersystems teleprotection communication product line this converter allows a...
Fiber Optical Extender L/R -250km
Fibersystem 21-223 SM/SM Extender (converter) is intended to extend optical reach for low speed data signal into long haul distances. Using a 21-223 the optical short reach signals can be sent without the need for additional and expensive communication systems normally found in long haul communications. When combined with the other products in Fibersystems teleprotection communication product line this converter allows a...
Fiber Optical Extender 80-120km
Fibersystem 21-223 SM/SM Extender (converter) is intended to extend optical reach for low speed data signal into long haul distances. Using a 21-223 the optical short reach signals can be sent without the need for additional and expensive communication systems normally found in long haul communications. When combined with the other products in Fibersystems teleprotection communication product line this converter allows a...
Fiber Optical Conv G.703 Codir C37.94 MM
The Fiber Optical Converter G.703 Codir – IEEE C37.94 (C3794) (21-216) is intended for connecting tele protection equipment to telecom multiplexers at substations. It can also be used to directly interconnect protection equipment and multiplexers to use the IEEE C37.94 standard to interconnect with equipment that only support G.703 interfaces.
Fiber Optical Converter IEEE C37.94 MM/SM
21-203 is a protocol independent optical-electrical-optical long haul converter link with data integrity control for high reliability. The incoming multimode signal is sampled and packaged in 4B/5B code before transmission on the singlemode interface. Incoming singlemode signal is decoded and error detected before reassembled and transmitted out the multimode interface. This conversion method offers a better (lower) error rate for low speed...
Fiber Optical Converter G.703-C37.94 E1 820nm Multimode
21-219 is an electro optical multiplexer between one G.703/704 E1 and two IEEE C37.94 (C3794) optical ports. The two IEEE ports are fully mapped into G.703 (G703) standard frame structure of the E1 port, allowing for further SDH/ PDH multiplexing and de-multiplexing. 21-219 derives it synchronization from the network port (E1) or from an internal 2048Kbps PDH compliant clock enabling it to...
