Dual Balun Cable Fly Lead – BNC to RJ45
The Dual BNC Male Coax to RJ45 Balun Cables provides a low cost convenient solution for connecting your balanced 120 ohm equipment to an unbalanced G703 E1 line.
Balun cables comes in various lengths: 20 cm to 3 meter and they provides bi-directional signal conversion, impedance matching and isolation protection. Suitable for 2Mbit/s E1/T1 and 8Mbit/s E2/T2 data streams. Accessories to Fibersystem 21-219.
Product Description
- Accessories to Fibersystem 21-219
- BNC Male – RJ45 Socket
- 75 ohm Unbalanced Coax – 120 ohm Balanced Twisted Pair
- G703 and G704 Compliant
- E1 (2Mbit/s) and E2 (8Mbit/s)
- Length: 20 cm to 3 meter
- Contact us for other lengths.
Technical Data & Features
Specifications (depending on length, example 20 cm)
- 75 ohm Connection: 2 x BNC(M)
- 120 ohm Connection: Shielded RJ45/RJ48C Socket
- Transmission Line: ITU-T G.703 or G.704 (transparent)
- Speed: 2.048Mbit/s (E1/T1) and 8.448Mbit/s (E2/T2)
- Cross Talk: >80dB from 0.1 to 12MHz between 2 baluns 15mm apart
- Insertion Loss: Maximum 0.2dB at 2Mbit/s, 0.3dB at 8Mbit/s
- Return Loss: -29dB at 2Mbit/s, -21dB at 8Mbit/s
- Earthing – Grounding: Tx and Rx Ring to RJ45 / RJ48 Shield, via 0.1μF capacitor
- Wiring Scheme: 1 – Tx Tip, 2 – Tx Ring, 4 – Rx Tip, 5 – Rx Ring
- Materials: Case – ABS UL-94V0 Fire Retardant Plastic
- Weight: 0.2Kg
- Warranty: 10 Years Parts and Labour
- MTBF Estimated: 30 Years
- Operating Temperature: 0° to 50° C
- Power Requirements: None
Associated products
Fiber Optical Converter IEEE C37.94 - G.703 E1 (21-219v2)
The 21-219, Fiber optic converter IEEE C37.94 - G.703 E1 is intended to extend distance and galvanic isolate the teleprotection equipment for substations connection to telecom network. The 21-219 is an electro optical multiplexer between one G.703 E1 and two IEEE C37.94 optical ports. The two IEEE ports are fully mapped into the G.703 standard frame structure of the E1 port, allowing...
Fiber Optical Converter IEEE C37.94 - G.703 E1 (21-219v2)
The 21-219, Fiber optic converter IEEE C37.94 - G.703 E1 is intended to extend distance and galvanic isolate the teleprotection equipment for substations connection to telecom network. The 21-219 is an electro optical multiplexer between one G.703 E1 and two IEEE C37.94 optical ports. The two IEEE ports are fully mapped into the G.703 standard frame structure of the E1 port, allowing...
Fo converter IEEE C37.94 and E1 over Synchronous Ethernet (SyncE)
SyncE is an electro-optical converter between two IEEE C37.94 optical ports and/or G.703/704 E1 and synchronous Ethernet and reverse. Both channels are transparently converted into UDP packets and back. Standards compliant for power substation installation.
Fiber Optical Conv G.703 Codir C37.94 MM
The 21-216 Fiber Optic G.703 Codirectional – IEEE C37.94 Converter is an electro-optical interface converter between G.703 Codir. 64 kbps (balanced) and IEEE C37.94 N×64 kbps optical interfaces. It extends the reach of balanced G.703 connections up to 2 km, ensuring interference-free, cost-effective transmission without signal degradation. The unit supports all IEEE C37.94 channel configurations and is easy to set up. The...
Fiber Optical Extender 80-120km
Fibersystem 21-223 SM/SM Extender (converter) is intended to extend optical reach for low speed data signal into long haul distances. Using a 21-223 the optical short reach signals can be sent without the need for additional and expensive communication systems normally found in long haul communications. When combined with the other products in Fibersystems teleprotection communication product line this converter allows a...
