Secure Data TAP Rugged

Fibersystem Secure Data TAP – Rugged, enables duplication of network signals, including any existing physical errors, to transmit-only ports and is designed to operate in extremely harsh environments and conditions.
Uninterupted pass-through of full duplex data over standard Category 5/6 copper network cable. The data TAP always keeps the traffic between the links uninterrupted, even in voltage loss conditions.

Description

  • Uninterupted pass-through of full duplex data over standard Category 5/6 copper network cable. The data TAP always keeps the traffic between the links uninterrupted, even in voltage loss conditions
  • Hardware based unidirectional communication built into the Data TAP. Also known as Data Diode functionality, hense no risk of sending data back into the network traffic
  • No extra software needed
  • Can be used in any ethernet application using copper connectivity
  • All data will be transparently forwarded

Rugged features

Low pressure

Designed to operate in low pressure according to MIL-STD 810G test method 500.5 Procedure-I type B airtransport storage and for operation procedure –II type a)

High temperature

Designed to operate in high temperature according to MIL-STD 810G test method 501.5 Procedure -I (operation) level Hot dry +70°C and procedure-III (storage) Hot/dry (+71°C)

Low temperature

Designed to operate in low temperature according to MIL-STD 810G test method 502.5 Procedure -I (Storage) Cold (C2)-46°C and procedure -II(operation) Cold (C2)-40°C

Rain

Designed to operate in Rain according to MIL-STD 810G test method 506.5 Rain 506.4-I Outdoor, -II indoor with drop

Humidity

Designed to operate in Humidity according to MIL-STD 810G test method 507.4 procedure -I High RH (B2) 6 cycles

Salt fog

Designed to operate in Salt fog according to MIL-STD810G test method 509.5 with 5% concentration for 7 days

Vibrations

Designed to operate in Vibrations according to MIL-STD 810G test method 514.5 procedure-I and -II Operation category 14 and 20; transport category 4,5 and 10. (Shock 40g@11ms, Chock 75g@6ms)

Shock

Designed to operate in Shock according to MIL-STD 810G method 516.6 procedure -I (functional test for ground equipment) 3 shocks in each 6 directions

Water protected

Designed to be Water protected according to IPX5

Dust protected

Designed to be Dust protected according to IP4X

EMC protected

Designed to be EMC protected according to MIL-STD 461F method; RE102 level Navy Mobile & Army and CE102 level Basic curve

EMI protected

Designed to be EMI protected according to MIL-STD 461F method: RS103 level Army; CS101 level Curve#1; CS114 level Army; CS115 level Army and CS116 level Army

Technical Data

Galvanic/Electrical link

  • Data speed 1 Gbps
  • Protocol 1000BaseT

Environmental

  • Temperature range -40 till +70 °C
  • Relative humidity 0-100%

Power Supply

  • DC 10-32V DC
  • Connector MIL-DTL-5015 compatible 10SL-3 (3 contacts size 16S)

Power Consumption

  • 8W

CE

  • Compliance EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, EN55022
  • Safety EN 60950

MIL Standard

  • MIL-STD 810G, MIL-STD 461F

Dimensions and Weight

  • Physical size 44 (H), 220 (W), 227 (D) mm / 1.7 (H), 8.6 (W), 8.9 (D) inch 1 HU high and ½19 inch wide
  • Weight 2.8 kg / 3.09 lbs

Datasheet

FS17012-Datasheet-Secure-Data-TAP-Rugged

Associated products