Gigabit Ethernet hardened switch, 4 SFP, 8 Copper, 240W PoE, 54Vdc input (if PoE needed), 18-60Vdc input (if PoE not needed), Cyber Security enabled

Cyber Security Ethernet Switch –  perfect for cyber-protection of physical security networks, SCADA based systems, safe-cityapplications and many more areas.

The Fibersystem Switch provides ironclad security with full control and customizable networking capabilities.

Cutting-edge hardware, coupled with network intelligence and policy enforcement software engines, offer an effective tool for securing sites and installations.

Product no: 60-00-6978 (M3199-300467) Category: Tags: , ,

Description

  • Detect and identify every element and endpoint in the network
  • Intelligent endpoint monitoring
  • Traffic inspection software engines
  • Flexible installation and port allocation options
  • High-power PoE support
  • The ideal solution for physical security, safe-city applications and substation tele protection equipment
  • Alert or block any attempt to connect an unauthorized device to the secured network
  • Inspect the incoming and outgoing traffic, at port level, to make sure that only known, safe, and identified traffic, from authorized entities, is allowed
  • Detect Layer2 and Layer3 cyber-attacks: CAM overflow, ARP spoofing or poisoning, IP address spoofing, Stream and video hijacking, Spanning-Tree Protocol manipulation, Denial of services
  • Report, and take automatic action to restore the continuous operation of the network
  • HW protection makes the switch policy enforcement tamper proof

Technical Data

Power Supply

  • DC feed 24V (+19Vdc to +36Vdc), 48V (+36Vdc to +60Vdc), or 54Vdc. Redundant power inputs.
  • Power Consumption Up to 255W depending on attached PoE devices.
  • PoE 2 x 60W per port (Ultra PoE). 4 x 30W per port (IEEE 802.3af/IEEE 802.3at).

Environmental Info

  • Operating temperature -40ºC to +75ºC (no fans)
  • Storage temperature -40ºC to +85ºC
  • Relative humidity 5 to 95% non-condensing.
  • Dimensions 190mm x 140mm x 110mm
  • Weight 2 kg
  • Enclosure Aluminum die cast for improved heat dissipation. IP-40 Protection.
  • Environment RoHS compliant.

Interfaces

  • Copper Ethernet 8 x 10/100/1000Mbps auto-negotiate ports.
  • Fiber Ethernet 4 x SFP ports including 100/1000Mbps support with Digital Diagnostic Monitoring.
  • Console port RS232 port using Cisco CLI pin-out for local access.
  • *External UART Dedicated RS232/422/485 interface for remotely accessing legacy equipment.
  • Discrete I/O Discrete digital input and dry contact relay output for connecting to external sensors or actuators.
  • Configuration freeze Hidden pushbutton for setting the unit to read only mode and block any possibility of remote configuration change.

Switch

  • Engine Jumbo frame support. IPv4/IPv6 multicast. 4Mb packet memory. 8192 MAC addresses
  • QoS 8 priorities + 8 CoS queues per port. Strict or Weighted Round Robin scheduling.
  • VLAN IEEE802.1Q VLAN with 8K MACs and 4K VLANs.
  • STP RSTP (Rapid Spanning-Tree) and *MSTP (Multiple) support.
  • Snooping IGMPv2 and IGMPv3. MLDv1 and MLDv2.
  • *Access control IEEE 802.1X.
  • *Security Radius and TACACS+.

Management

  • GUI HTTP/HTTPs server.
  • SNMP SNMPv1/v2/v3 agent.
  • CLI Telnet/SSHv2.
  • Alerts SNMP traps and Syslog messages.
  • RMON RMON Group 1, 2, 3, 9.
  • Access list Restricted access to management info.
  • Backup & restore Configuration download or upload.
  • IP configuration Static or using DHCP.

Compliance

  • IEEE 802.3 IEEE 802.3vb, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3ultra-at, IEEE 802.3i, IEEE 802.3z
  • Regulation CE, FCC, VCCI, UL
  • Isolation 2.1 KVDC, ESD: 15KV, Surge: 4KV, EFT: 4KV
  • Safety EN60950-1:2001
  • EMC EN61000-6-3:2007, EN55022, EN61000-6-2:2007, EN55024
  • Utility Substations IEEE 1613, IEC 61850-3

Items marked as * are optional features.

Datasheet

Security-Switch

Associated products