Fiber Optical Switch 1×2 2-channel WebGUI MM
Evolving media and communication over IP demand high bandwidth network solutions. The switch is a long term solution for these networks since it is protocol independent and transparent to data speed.
The switch can be controlled remotely (Web GUI). The path through the switch is purely optical, there is no optical to electrical to optical conversion. There is no electrical loss or electrical bandwidth limit on the fiber optical path.
Product Description
- Pure optical path
- Transparent to data speed
- Protocol independent
- Manual or remote control, uses software calls to webserver to operate switching
- Management WebGUI, command and TTL-level
- Cost efficient
- Future proof
- Redundant power supply (AC and/or DC) (optional)
- HTTPS/SSL support
Technical Data & Features
Connections
- Optical Multimode 125 um, wavelength independent
- Optical channels in 2 x LC Duplex
- Optical channels out 2 x LC Duplex + 2 x LC Duplex
- Insertion loss type < 0.3 db
- Crosstalk -80 db
- Repeatability ± 0.1 db
- Switching time 3.5 ms
- Durability 30.000.000 Cycles
Security
- HTTPS/SSL. Secure communication over a computer network is supported. The communication protocol can be encrypted using HTTPS/Secure Sockets Layer (SSL).
Power
- Power Connector IEC60320
- Power Supply 100-240 VAC 50/60 Hz or 48-250 VDC ± 20%
- Power max 25 W
- Redundant power supply (optional)
Controller
- Connector RJ45
Mechanical data and environment
- Cabinet dimensions: (HxWxD) 45x483x173 mm
- Weight: 3 kg
- Operating temperature: 0° to 70° C
- Relative Humidity: 10%-80%