Fiber Optical Switch 1×2 1-channel WebGUI MM

Evolving media and communication over IP demand high bandwidth network solutions. The switch is a long term solution for these networks since it is protocol independent and transparent to data speed.

The switch can be controlled remotely (Web GUI). The path through the switch is purely optical, there is no optical to electrical to optical conversion. There is no electrical loss or electrical bandwidth limit on the fiber optical path.

Description

  • 1×2 1-channel
  • Pure optical path
  • Transparent to data speed
  • Protocol independent
  • Manual or remote control, uses software calls to webserver to operate switching
  • Management Web GUI, command and TTL-level.
  • Cost efficient
  • Future proof
  • Redundant power supply (optional)

Technical Data

Connections

  • Optical Multimode 125 um, wavelength independent
  • Optical channels in 1 x LC Duplex
  • Optical channels out 1 x LC Duplex + 1 x LC Duplex
  • Insertion loss type < 0.3 db
  • Crosstalk -80 db
  • Repeatability ± 0.1 db
  • Switching time 3.5 ms
  • Durability 30.000.000 Cycles

Power

  • Power Connector IEC60320
  • Power Supply 100-240 VAC 50/60 Hz or 48-250 VDC ± 20%
  • Power max 25 W
  • Optional redundant power supply

Controller

  • Connector RJ45

Mechanical data and environment

  • Cabinet dimensions: (HxWxD) 45x483x173 mm
  • Weight: 3 kg
  • Operating temperature: 0° to 70° C
  • Relative Humidity: 10%-80%

Web GUI

Datasheet

Associated products