Fiber Optical Extender HDBaseT Transceiver (45-600)

The Fibersystem HDBaseT Fiber Optic Extender increase the maximal distance of the HDBaseT link from 100m up to 80.000 meter. In addition fiber optic cables are not affected by electromagnetic interference from other cables or surroundings. The Extender is very easy to install, no training or installation guide is necessary.

Description

  • Up to 80 km of distance without any loss in quality and minimal latency
  • High Speed 10 Gbps
  • No interference between cables
  • Galvanic separation between networks.
  • Easy to install, just connect!

Technical Data

Fiber optic link

  • Data speed: 10 Gbps
  • Protocol: HDBaseT
  • Wavelength: 850nm/1300nm/1550nm. The fiber optic component is of type SFP, where “P” stands for “Pluggable”. The type of SFP is selectable to match the distance in the application.
  • Fiber optical connector: LC
  • Optical system budget: Depends on type of SFP.
  • Typical distance: 0 to several km Depending on type of fiber and video bandwidth. For multimode fiber, MM, 62.5/125 or 50/125um,the distance is limited by the bandwidth of the fiber in use. typical distance in multimode fiber is 0 – 300m. For single mode fiber the selected type of SFP sets the distance limits up to 80 km.

Galvanic/Electrical link

  • Data speed: 10 Gbps
  • Protocol: HDBaseT
  • Connector: RJ45

External Power Supply

  • Input: 100VAC to 240VAC 50-60 Hz 0.9 A
  • Output: 12V 25A
  • Power consumption: 25W
  • Connector: 2.5mm

Environmental

  • Temperature range: Operating, +10 to +40 C C. Storage, 0 to +70 C.
  • Relative humidity: Operating, 5 to 95 % . Storage, 5 to 95 % non condensing.

CE

  • Compliance: EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, EN55022
  • Safety: EN 60950

Dimensions and Weight

  • Physical size: 30 (H), 110 (W), 230 (D) mm, 1.18 (H), 4.33 (W), 9.06 (D) inch
  • Weight: 0.85 kg / 1.87 lbs.

Datasheet

FS18130-Datasheet-HDBaseT-Fiber-Optical-Extender

Associated products