Fiber Optical Converter IEEE C37.94 MM/SM

Fibersystem 21-223 SM/SM converter is intended to extend optical reach for low speed data signal into long haul distances. Using a 21-223 the optical short reach signals can be sent without the need for additional and expensive communication systems normally found in long haul communications. When combined with the other products in Fibersystems teleprotection communication product line this converter allows a very cost effective solution.

The 21-223 is particularly useful in differential line protection setups where dedicated fiber is available thus eliminating the need for multiplexers for the teleprotection traffic.

Product no: 60-00-7251 Category: Tags: , ,

Description

  • Protocol independent up to 2Mbit/s 1310nm (IEEE C37.94)
  • Powerbudget 30dB, 46dB up to 50dB in singlemode 1550nm
  • Standards compliant for power substation installation
  • 19” mounting with only 200mm depth
  • Single supply range from 48VDC to 250VDC or 110VAC to 230VAC
  • Typical distance 80km up to 120km

Technical Data

Fiber optic link – Singlemode 1310 Interface

  • Wavelength: 1310nm.
  • Fiber optical connector: SC
    Optical system budget: 15dB in singlemode fiber 9/125um.
  • Typical distance: 20km

Fiber optic link – Singlemode 1550 Interface

  • Wavelength: 1550nm
  • Fiber optical connector: LC
  • Optical system budget 21-223: 30dB in singlemode fiber 9/125um.
  • Optical system budget 21-223M/R: 46dB in singlemode fiber 9/125um.
  • Optical system budget 21-223L/R: 50dB in singlemode fiber 9/125um.
  • Typical distance: Up to 250 km with typical 0,20 dB/km
  • Fiber optic protocol: Singlemode 1330 data is sampled at 25M samples/s and coded with 4B/5B coding. Singlemode 1550 data 125Mbit/s

Power

  • DC: 48V DC to 250V DC, ±20%
  • AC: 110VAC to 230VAC ±20%, 50−60 Hz
  • AC/DC-connector: IEC 320, 3 pin
  • Power consumption: <15W

Environmental

  • Temperature range: Operating, -20 to +55 oC. Storage, -40 to +85 oC.
  • Relative humidity: Operating, 5 to 95 % . Storage, 5 to 95 % non condensing
  • CE compliance

Immunity

  • EN 61000-6-2, EN 61000-6-4, EN 50178

Mechanical

  • Vibration: IEC 60255-21-1, IEC 60255-21-2, IEC 60255-21-3
  • EMC compliance: IEC 60255-22-1, IEC 60255-22-2, IEC 60255-22-3,IEC 60255-22-4
  • Insulation: IEC 60255 / EN 50178 , IEC 60255-5, IEC 60255-5

Dimensions and Weight

  • Physical size
  • Height: 45 mm, Width 483 mm, Depth 173 mm
  • Weight: 3 kg

Datasheet

FS17033 Datasheet 21-223 Fiber optic IEEE C37.94 – G.703 E1 Booster R3

Associated products