Fiber Optical Converter G.703 64kbps

21-180 is a synchronous 64kbps modem for codirectional clock environments that can be used to extend reach of balanced G.703 interfaces up to 2km allowing for a cost effective transmission without electromagnetic interference and signal degradation.

The modem can use the incoming clock from G.703 interface and propagate it down the fiber or use its internal clock source running at PDH accuracy. The modems automatic clock phase adjustment accommodates for any fiber round trip delay.

Description

  • Fiber optic transmission, immune to EI and RFI
  • Standards compliant for power substation installations
  • Single power supply range from 48VDC to 230VAC
  • 19″ mounting with only 200mm depth

Technical Data

Fiber optical link

  • Data Speed 64 kbps (1,536Mbps linespeed)
  • Protocol Fibersystem proprietary 64kbps
  • Fiber Multi mode 50/125µm or 62,5/125µm, ST-connector
  • Optical System Budget 13dB in 62,5/125µm. 9dB in 50/125µm fiber
  • Typical distance 0-2km (3dB system margin for 50/125µm and 6dB for 62,5/125µm)

Galvanic

  • Galvanic Data speed 64Kbps
  • Galvanic Protocol G.703
  • Connector RJ45 , Twisted pair cable

Power Supply

  • DC 48V DC to 250V DC, ±20%
  • AC 230V AC , ±20%, 50 60 Hz
  • AC-connector IEC 320, 3-pin

Environmental

  • Operating Temperature Range -25 to +55°
  • Storage Temperature Range -40 to +85°
  • Relative Humidity Operating 5 to 95%Relative Humidity Storage 5 to 95% non condensing

CE compliance

  • Immunity EN 61000-6-2
  • Emission EN 61000-6-4
  • LVD EN 50187; RIV=250 V OVC=III

Mechanical

  • Vibration IEC 60255-21-1 Class 2
  • Shock IEC 60255-21-2 Class 2
  • Seismic IEC 60255-21-3 Class 2

EMC compliance

  • ESD IEC 60255-22-2 Class 3, contact 6kV, air 8kV
  • Radiated IEC 60255-22-3 / IEEE/ANSI C37.94.2; 35V/m
  • Burst Power IEC 60255-22-1 Class III
  • Burst Communication IEC 60255-22-1 Class II; 0,5kV diff; 1kV common mode
  • Fast Transient Power IEC 60255-22-4 Class IV
  • Fast Transient Communication IEC 60255-22-4 Class II; 1kV

Insulation

  • Dielectric Test IEC 60255-5, 2,0kV 1min
  • Impuls Voltage Test IEC 60255 / EN50178 5kV / 6 kV
  • Insulation Resistance IEC 60255-5; > 100Mohm at 500VDC

Dimensions and Weight

  • Physical size Height 45mm, Width 483mm, Without brackets 380mm), Depth 173mm
  • Weight 3 kg

Datasheet

FS17031 Datasheet 21-180 Fiber optic G.703 64kbps Codir Converter R3

Technical Manual

FS18134-Technical-Manual-21-180-R2

Associated products