F
Contact us about this product
Fiber Optical Booster M/R -200km
Fibersystem 21-223 SM/SM converter is intended to extend optical reach for low speed data signal into long haul distances. Using a 21-223 the optical short reach signals can be sent without the need for additional and expensive communication systems normally found in long haul communications. When combined with the other products in Fibersystems teleprotection communication product line this converter allows a very cost effective solution.
The 21-223 is particularly useful in differential line protection setups where dedicated fiber is available thus eliminating the need for multiplexers for the teleprotection traffic.
Product Description
- Protocol (transparent) independent up to 2Mbit/s 1310nm (IEEE C37.94) (C3794)
- Powerbudget 30dB, 46dB up to 50dB in singlemode 1550nm
- Standards compliant for power substation installation
- 19” mounting with only 200mm depth
- Single supply range from 48VDC to 250VDC or 110VAC to 230VAC
- Typical distance up to 200km
Technical Data & Features
Fiber optic link – Singlemode 1310 Interface
- Wavelength: 1310nm.
- Fiber optical connector: LC
Optical system budget: 15dB in singlemode fiber 9/125um. - Typical distance: up to 200km
Fiber optic link – Singlemode 1550 Interface
- Wavelength: 1550nm
- Fiber optical connector: LC
- Optical system budget 21-223: 30dB in singlemode fiber 9/125um.
- Optical system budget 21-223M/R: 46dB in singlemode fiber 9/125um.
- Optical system budget 21-223L/R: 50dB in singlemode fiber 9/125um.
- Typical distance: Up to 200 km with typical 0,20 dB/km
- Fiber optic protocol: Singlemode 1330 data is sampled at 25M samples/s and coded with 4B/5B coding. Singlemode 1550 data 125Mbit/s
Power
- DC: 48V DC to 250V DC, ±20%
- AC: 110VAC to 230VAC ±20%, 50−60 Hz
- AC/DC-connector: IEC 320, 3 pin
- Power consumption: <15W
Environmental
- Temperature range: Operating, -20 to +55 oC. Storage, -40 to +85 oC.
- Relative humidity: Operating, 5 to 95 % . Storage, 5 to 95 % non condensing
- CE compliance
Immunity
- EN 61000-6-2, EN 61000-6-4, EN 50178
Mechanical
- Vibration: IEC 60255-21-1, IEC 60255-21-2, IEC 60255-21-3
- EMC compliance: IEC 60255-22-1, IEC 60255-22-2, IEC 60255-22-3,IEC 60255-22-4
- Insulation: IEC 60255 / EN 50178 , IEC 60255-5, IEC 60255-5
Dimensions and Weight
- Physical size
- Height: 45 mm, Width 483 mm, Depth 173 mm
- Weight: 3 kg
Ethernet Isolator (fiber optical)
The new Fibersystem Ethernet Isolator is designed to provide protection for networks and network connected...
Monitor 21” (TEMPEST Level A & RÖS U1)
Fibersystem Secondary Monitor 21” is connected with DVI over fiber to PC 21 Workstation. No...
Fiber Optical Switch 1×4 2-channel MM
Evolving media and communication over IP demand high bandwidth network solutions. Fibersystem Fiber Optical Switch...
Fiber Optical Switch 1×2 2-channel MM
Evolving media and communication over IP demand high bandwidth network solutions. Fibersystem Fiber Optical a/b...
HDMI HDBaseT Transciever Card Module
The HDMI HDBaseT Transceiver - Receiver link enables secure, remote CPU location with extended range...
Fiber Optical Trip Link BI:110V. 39dB up to 120km
Fibersystem Fiber Optical Transfer Trip Link (23-450) is intended to be used for remote trip...
Fiber Optical Converter G.703 64kbps
21-180 is a synchronous 64kbps modem for codirectional clock environments that can be used to...
Fiber Optical Converter IEEE C37.94 MM/SM L/R
21-203L/R is a protocol independent optical-electrical-optical long haul converter link with data integrity control for...
