Ethernet Fiber Optical Dual Converter 1 Gbit

Fibersystem’s Ethernet Fiber Optical Dual Converter is a secure rack-mounted module featuring two fully independent channels, specifically designed to prevent crosstalk between channels. The product is robust, tamper-resistant, and housed in an EMC-shielded enclosure. It is available in versions supporting Gbps speeds. The module fits Fibersystem’s 19-inch rack system or can be used in standalone configurations, making it ideal for integration into existing solutions that require high data security and reliability.

Contact us about this product
Product Description

Fibersystem’s Ethernet Fiber Optical Dual Converter is a secure rack-mounted module featuring two fully independent channels, specifically designed to prevent crosstalk between channels. The product is robust, tamper-resistant, and housed in an EMC-shielded enclosure. It is available in versions supporting 100 Mbps, 100 Mbps/1 Gbps, and 1 Gbps speeds. The module fits Fibersystem’s 19-inch rack system or can be used in standalone configurations, making it ideal for integration into existing solutions that require high data security and reliability.

Rack Module Secure features

  • Dual channels completely independent of each other
  • No crosstalk between chamber one and two
  • Tamper proof enclosure
  • Sealed enclosure for assurance
  • EMC and back channel protected in hardware design
  • The Rack Modules can be integrated in your existing solution/ product
  • Long life cycle product

Galvanic/Electrical link

  • Data speed: 1Gbit
  • Media: 1000BaseTX
  • Connector: RJ-45/LC
  • Number of connectors: 2

Fiber optic links

  • Data speed: 1Gbit
  • Media: 1000BaseFS
  • Wavelength: 850nm
  • Fiber optical connector: LC
  • Fiber: Multimode 50/125μm or 62.5/125μm
  • Optical system budget: 13dB in 62.5/125μm. 9dB in 50/125μm fiber
  • Typical distance: 0 – 2km (3dB system margin for 50/125μm and 6dB for 62.5/125μm)

Environmental

  • Temperature range: Operating, +10 to +40C. Storage, -40 to +70C.
  • Relative humidity: Operating, 5 to 95%. Storage, 5 to 95% non condensing.

CE

  • Low Voltage Directive, 2014/35/EU
  • EMC directive 89/336/EEC, 2014/30EU

Dimensions and Weight

  • Physical size: 115(H), 20(W), 195(D)mm/ 4.5(H), 0.8(W), 7.7(D)inch
  • Weight: 0.15kg/ 33lbs
Product no: 60-00-7425 Categories: ,
Fiber Optical Extender 80-120km

Fiber Optical Extender 80-120km

Fibersystem 21-223 SM/SM Extender (converter) is intended to extend optical reach for low speed data signal into long haul distances. Using a 21-223 the optical short reach signals can be sent without the need for additional and expensive communication systems normally found in long haul communications. When combined with the other products in Fibersystems teleprotection communication product line this converter allows a...

View product
Fiber Optical Converter IEEE C37.94 MM/SM

Fiber Optical Converter IEEE C37.94 MM/SM

21-203 is a protocol independent optical-electrical-optical long haul converter link with data integrity control for high reliability. The incoming multimode signal is sampled and packaged in 4B/5B code before transmission on the singlemode interface. Incoming singlemode signal is decoded and error detected before reassembled and transmitted out the multimode interface. This conversion method offers a better (lower) error rate for low speed...

View product
Fiber Optic Converter G.703 Codir C37.94 (21-216)

Fiber Optical Conv G.703 Codir C37.94 MM

The Fiber Optical Converter G.703 Codir – IEEE C37.94 (C3794) (21-216) is intended for connecting tele protection equipment to telecom multiplexers at substations. It can also be used to directly interconnect protection equipment and multiplexers to use the IEEE C37.94 standard to interconnect with equipment that only support G.703 interfaces.

View product
Fiber Optic Converter 21-219

Fiber Optical Converter G.703-C37.94 E1 820nm Multimode

21-219 is an electro optical multiplexer between one G.703/704 E1 and two IEEE C37.94 (C3794) optical ports. The two IEEE ports are fully mapped into G.703 (G703) standard frame structure of the E1 port, allowing for further SDH/ PDH multiplexing and de-multiplexing. 21-219 derives it synchronization from the network port (E1) or from an internal 2048Kbps PDH compliant clock enabling it to...

View product