Data Diode Rugged 100Mbit (Simplex)

Fibersystem Rugged Data Diodes are designed to operate in extremely harsh environments and conditions. Enables unidirectional transfer of data over Fiber cable between two networks with hardware separation to guarantee security. This completely eliminates the risk for dataflow in false direction. (TEMPEST Level A/ EMSEC/ RÖS U1)

Description

  • One-way connection between two networks (also known as Simplex)
  • Based on hardware. No physical risk of sending data in false direction
  • No extra software needed. The datalines are physicaly cut/interrupted on circuit board
  • This completely eliminates the risk for data flowing in false direction
  • Fiberoptical links for galvanic seperation between networks
  • Can be used in any ethernet application using fiber or copper connectivity
  • All data will be transparently forwarded
  • UDP support
  • EMC and back channel protected in hardware design (Rugged products, 60-00-7303, 60-00-7304)
  • Fiber or Copper interface can be chosen independantly for In and Out (60-00-7303, 60-00-7304)
  • 5 stages of Uni directional hardware functionality (Rugged products, 60-00-7303, 60-00-7304)
  • The cards can be integrated in your existing solution/ product
  • Versions of Fibersystem Data Diodes
    • Module
    • Integrated
    • Rugged and TEMPEST Level A/ EMSEC/ RÖS U1
    • Fiber Optical or Copper interface
    • 100 Mbit/s or 1000 Mbit/s

Rugged features

Low pressure
Designed to operate in low pressure according to MIL-STD 810G test method 500.5 Procedure-I type B airtransport storage and for operation procedure –II type a)

High temperature
Designed to operate in high temperature according to MIL-STD 810G test method 501.5 Procedure -I (operation) level Hot dry +70°C and procedure-III (storage) Hot/dry (+71°C)

Low temperature
Designed to operate in low temperature according to MIL-STD 810G test method 502.5 Procedure -I (Storage) Cold (C2)-46°C and procedure -II(operation) Cold (C2)-40°C

Rain
Designed to operate in Rain according to MIL-STD 810G test method 506.5 Rain 506.4-I Outdoor, -II indoor with drop

Humidity
Designed to operate in Humidity according to MIL-STD 810G test method 507.4 procedure -I High RH (B2) 6 cycles

Salt fog
Designed to operate in Salt fog according to MIL-STD810G test method 509.5 with 5% concentration for 7 days

Vibrations
Designed to operate in Vibrations according to MIL-STD 810G test method 514.5 procedure-I and -II Operation category 14 and 20; transport category 4,5 and 10. (Shock 40g@11ms, Chock 75g@6ms)

Shock
Designed to operate in Shock according to MIL-STD 810G method 516.6 procedure -I (functional test for ground equipment) 3 shocks in each 6 directions

Water protected
Designed to be Water protected according to IPX5

Dust protected
Designed to be Dust protected according to IP4X

EMC protected
Designed to be EMC protected according to MIL-STD 461F method; RE102 level Navy Mobile & Army and CE102 level Basic curve

EMI protected
Designed to be EMI protected according to MIL-STD 461F method: RS103 level Army; CS101 level Curve#1; CS114 level Army; CS115 level Army and CS116 level Army

Technical Data

Galvanic/Electrical link

  • Data speed 1 Gbps or 100Mbps depending on model

Fiber optic links

  • Data speed 1 Gbps or 100Mbps depending on model
  • Wavelength 850 nm or 1300 nm depending on model
  • Fiber optical connector LC
  • Fiber Multi mode 50/125um or 62.5/125um
  • Optical system budget 13dB in 62.5/um. 9dB in 50/125um fiber
  • Typical distance 0 – 2km (3dB system margin for 50/125um and 6dB for 62.5/125um)

Environmental

  • Temperature range -40 to + 70°C

Power Supply

  • DC 10-32VDC, Max 10W. (Optional 18-75VDC)
  • DC-connector 3 pin

Power Consumtion

  • 2,5W

CE

  • Compliance EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, EN55022
  • Safety EN 60950

Dimensions and Weight

  • Physical size 115 (H), 20 (W), 195 (D) mm / 4.5 (H), 0.8 (W), 7.7 (D) inch
  • Weight 0.15 kg / 0.33 lbs.

Datasheet

FS17012 Datasheet 50-800 Rugged Data Diode R4

Associated products