Card Module Data Diode 1Gbit

Fibersystems Data Diodes are used to allow secure networks to receive data from open/general purpose networks. Unidirectional datatransfer over fibercable or coppercable with hardware separation to guarantee security. This completely eliminates the risk for dataflow in false direction

Description

  • One-way connection between two networks (also known as Simplex)

  • Based on hardware. No physical risk of sending data in false direction

  • Fiber optical links for galvanic separation between networks

  • UDP and SNTP support

  • Can be used in any ethernet application using fiber or copper connectivity

  • All data will be transparently forwarded. No extra software needed. The datalines are psysically cut/interrupted on circuit board. This completely eliminates the risk for data flowing in false direction

  • Versions
    • Module
    • Integrated
    • Rugged and TEMPEST Level A/ EMSEC/ RÖS U1
    • Fiber Optical or Copper interface
    • 100 Mbit/s or 1000 Mbit/s

Technichal Data

Galvanic/Electrical link

  • Data speed 1 Gbps or 100Mbps depending on model

Fiber optic links

  • Data speed 1 Gbps or 100Mbps depending on model
  • Wavelength 850 nm
  • Fiber optical connector LC
  • Fiber Multi mode 50/125um or 62.5/125um
  • Optical system budget 13dB in 62.5/um. 9dB in 50/125um fiber
    Typical distance 0 – 2km (3dB system margin for 50/125um and 6dB for 62.5/125um)

Environmental

  • Temperature range -40 to + 70°C

CE

  • Compliance EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, EN55022
  • Safety EN 60950

Dimensions and Weight

  • Physical size 115 (H), 20 (W), 195 (D) mm / 4.5 (H), 0.8 (W), 7.7 (D) inch
  • Weight 0.15 kg / 0.33 lbs.

Datasheet

FS16303_Fibersystem_50-800_Data_Diode_Rev_O

Associated products